The procedure for replacing the battery on an Olympus spectrometer may vary by model, but can generally be followed as follows:
1. Determine the type and specification of the battery that needs to be replaced. Information can be found in the equipment manual or on the battery itself.
2. Turn off the spectrometer and unplug the power cord to avoid accidental electric shock.
3. To open the case of the instrument, a screwdriver or other tools are usually required.
4. Locate the location of the battery. In some spectrometers, the battery may be located on the bottom of the device, while in others it may be inside the device. Some batteries may require disassembly of other parts to access.

5. Remove the old battery. It may be necessary to remove some screws or other devices holding the battery in place, then gently pull the battery out.
6. Insert the new battery into the battery socket. Pay attention to the positive and negative polarity of the battery and make sure it is inserted correctly. Some batteries may need to be secured with screws or other devices.
7. Reinstall the instrument case, and make sure that the screws and other fixing parts are tightly fixed.
8. Connect the power cord and turn it on to check whether the spectrometer works normally.
Please note that battery replacement involves electronic equipment and has certain risks. If you are not sure about the operation, please consult a professional or directly contact the Olympus customer service department for help.

Therefore, I recommend TEFOO ENERGY standard lithium battery, which is convenient for operators to carry out mobile indoor and outdoor operations. Providing continuous, efficient and stable mobile power supply has become the greatest guarantee for the normal operation of such equipment. The solution uses high-performance batteries, so that the entire battery has the characteristics of high energy ratio, light weight, small size, high cycle life, high safety, and high consistency. The battery is very convenient to use, and the original battery can be directly replaced on site.