Drop-In Replacement Smart Battery Packs for Industry-Standard Footprints

Second-source or replace your current smart battery pack — in most standard-footprint cases, without redesigning your device.
End-of-life notices, allocation, long lead times, and single-source risk are common reasons device manufacturers look for a replacement smart battery pack. TEFOO’s standard smart battery lineup covers the industry-standard footprint classes used in medical devices, ruggedized computers, and portable instrumentation — 13 models across 3.6v, 7.2V, 10.8V, and 14.4V platforms, all compliant with the SMBus v1.1 Smart Battery specification and supported by IEC 62133-2 and UN 38.3 documentation. Standard models are held in stock.
Request a free drop-in compatibility assessment ⬇️
When Do You Need a Replacement Smart Battery Pack?
A replacement program is usually triggered by supply-side events, not by battery performance:
- End-of-life (EOL): the current supplier discontinues the pack, and the device still has years of production or service life ahead
- Lead time and allocation: quoted lead times stretch beyond your production plan, or volume caps appear at short notice
- Single-source risk: the device depends on one supplier with no qualified alternative — a growing audit finding in medical and industrial supply-chain reviews
- Cost pressure: the incumbent pack no longer fits the device’s target BOM cost at current volumes
-
Communication and technical support gaps: the incumbent supplier cannot sustain the engineering communication the device team needs — slow responses across time zones, limited documentation support, and little assistance with integration or customization requests
-
Brand premium: part of the incumbent pack’s price reflects brand premium rather than engineering content; when a specification-equivalent alternative is available, that premium becomes difficult to justify in cost reviews
In all four cases, the engineering question is the same: can a replacement pack drop into the existing battery bay, connector, and host firmware without a device redesign? The qualification checklist below answers that question systematically.
How Do You Qualify a Drop-In Replacement Battery Pack?
A true drop-in replacement must match the incumbent pack on four layers. A mismatch on any one of them turns a “replacement” into a redesign:
- Mechanical fit: enclosure dimensions and tolerances, latch and guide geometry, and bay clearance. Match the footprint class first — the 20xx-class size designations used across the industry (204X,205X,204X) describe interchangeable bay geometries.
- Electrical interface: voltage platform (3.6V / 7.2V / 10.8V / 14.4V), capacity and energy, continuous and peak discharge capability, and the +/C/D/T/- contact pinout.
- Communication behavior: SMBus v1.1 Smart Battery Data Specification command set, fuel-gauge reporting (SOC, remaining capacity, cycle count, temperature), and how the host firmware reads them. TEFOO packs comply with SMBus v1.1 with fuel gauge accuracy up to 1% — the same protocol layer the host device already implements.
- Certification continuity: the replacement pack’s CCC / IEC 62133-2 / UL2054 reports and UN 38.3 test summary must slot into your device technical file without gaps, and any device-level re-certification scope must be understood before the switch.
TEFOO’s engineering team runs this four-layer check as a free compatibility assessment — send the incumbent pack’s datasheet or a physical sample, and you receive a written fit/no-fit evaluation with any gaps identified.
Cross Reference: Industry-Standard Footprint Classes to TEFOO Models
Select by the footprint class and pack configuration of your current battery. All models share the SMBus v1.1 interface, +/C/D/T/- pinout, integrated LED RSOC indicator, cell balancing, and comprehensive protection functions. Specifications below are from TEFOO product datasheets.
3.6V Platform (1S Configuration)
|
Footprint Class |
Pack Form |
TEFOO Model |
Capacity / Energy |
Max Discharge |
Dimensions |
|---|---|---|---|---|---|
|
Compact stick pack |
1S1P |
GSB1S38 |
3.6V / 3300mAh / 11.88Wh |
3.5A / 10W |
75.0×20.5×20.5mm (2.95×0.81×0.81in) |
7.2V Platform (2S Configuration)
|
Footprint Class |
Pack Form |
TEFOO Model |
Capacity / Energy |
Max Discharge |
Dimensions |
|---|---|---|---|---|---|
|
2037-class |
2S1P |
GS2037BH |
7.2V / 3300mAh / 23.76Wh |
40W |
85.0×42.0×22.4mm (3.35×1.65×0.88in) |
|
2037-class |
2S2P |
GS2037DH |
7.2V / 6600mAh / 47.52Wh |
60W |
150.5×42.0×22.4mm (5.93×1.65×0.88in) |
|
2057-class |
2S2P |
GS2057DH |
7.2V / 6600mAh / 47.52Wh |
60W |
85.1×77.4×22.7mm (3.35×3.05×0.89in) |
|
2047-class |
2S3P |
GS2047FH |
7.2V / 9900mAh / 71.28Wh |
60W |
150.0×58.5×22.0mm (5.91×2.30×0.87in) |
|
2057-class |
2S4P |
GS2057HH |
7.2V / 13200mAh / 95.04Wh |
60W |
150.5×77.4×22.7mm (5.93×3.05×0.89in) |
10.8V Platform (3S Configuration)
|
Footprint Class |
Pack Form |
TEFOO Model |
Capacity / Energy |
Max Discharge |
Dimensions |
|---|---|---|---|---|---|
|
2040-class |
3S1P |
GS2040CH |
10.8V / 3300mAh / 35.64Wh |
40W |
84.61×58.5×22.0mm (3.33×2.30×0.87in) |
|
2040-class |
3S2P |
GS2040FH |
10.8V / 6600mAh / 71.28Wh |
80W |
150.0×58.5×22.0mm (5.91×2.30×0.87in) |
|
2040-class |
3S3P |
GS2040IM |
10.8V / 9000mAh / 97.2Wh |
80W |
214.0×58.5×22.0mm (8.43×2.30×0.87in) |
|
2020-class |
3S3P |
GS2020IM |
10.8V / 9000mAh / 97.2Wh |
80W |
148.9×88.8×19.9mm (5.86×3.50×0.78in) |
14.4V Platform (4S Configuration)
|
Footprint Class |
Pack Form |
TEFOO Model |
Capacity / Energy |
Max Discharge |
Dimensions |
|---|---|---|---|---|---|
|
2034-class |
4S1P |
GS2034DH |
14.4V / 3300mAh / 47.52Wh |
60W |
150.5×42.0×22.4mm (5.93×1.65×0.88in) |
|
2054-class |
4S1P |
GS2054DH |
14.4V / 3300mAh / 47.52Wh |
60W |
85.1×77.4×22.7mm (3.35×3.05×0.89in) |
|
2054-class |
4S2P |
GS2054HH |
14.4V / 6600mAh / 95.04Wh |
100W |
150.5×77.4×22.7mm (5.93×3.05×0.89in) |
|
2024-class |
4S2P |
GS2024HH |
14.4V / 6600mAh / 95.04Wh |
200W |
167.3×106.8×21.4mm (6.59×4.20×0.84in) |
Within each footprint class, parallel-configuration variants (2P/3P/4P) multiply capacity and runtime in the same or a related bay geometry — so a replacement program can also be an upgrade path. Mating hardware for the host side is available: GSC550M18012D / GSC550M09010D battery connectors, the GSCBB connector board, and the GSSBC adapter cable.
All specifications are from TEFOO datasheets. TEFOO products are manufactured by Shenzhen GRACE Technology Development Co., Ltd. and are not affiliated with, or endorsed by, any other battery supplier. References to industry-standard footprint classes and pack configurations are provided for compatibility identification only; all trademarks and part numbers of other manufacturers remain the property of their respective owners.
What Does the Replacement Qualification Process Look Like?
A structured four-step process moves from first contact to production supply:
- Compatibility assessment (free): provide the incumbent pack’s datasheet, part description, or a physical sample. You receive a written evaluation covering mechanical fit, electrical interface, SMBus behavior, and certification mapping, intended to support your internal change-control and supplier-qualification process.
- Sample validation: standard models ship from stock with a 7–30 day lead time and no minimum order quantity, so single-piece evaluation samples are a normal order, not a negotiation.
- Bench and system testing: verify charge/discharge behavior, fuel-gauge reporting through your host firmware, and in-device fit. The GSSBR SMBus reader and GSPMB20 power management module support bench-level validation without device modifications.
- Production transition: consistent specifications, long-term supply capability, and in-stock standard products support a controlled dual-sourcing period before full cutover — reducing risk while the incumbent supply winds down.
Compliance and Supply Terms
- Battery-level certifications: IEC 62133-2 / UL2054 — per-model test reports and certificates are available on request
- Transport: UN 38.3 test summary and MSDS documentation available for the standard range
- Regional marks: CCC, CE, FCC, RoHS, UKCA, PSE, KC; additional market-specific certificates can be arranged per customer requirements
- Manufacturer quality systems: ISO 13485 (medical device quality management), ISO 9001, ISO 14001, ISO 45001
- Supply: standard products in stock, 7–30 day lead time, no MOQ, long-term availability commitment
Certification scope and document versions vary by model and target market; request the per-model certificates and test reports as part of supplier qualification.

Start Your Drop-In Compatibility Evaluation
Send us your current battery’s datasheet or a sample — our engineering team returns a written drop-in compatibility evaluation. Standard models ship in 7–30 days, with no MOQ from evaluation sample to production volume.